The CT D Shape Steel Triplock Karabiner comes with captive bar and a traditional locking system which is ideal for dirty or muddy environments. Correct orientation of load can be obtained due to its Asymmetrical shape.
CT D Shape Steel Triplock Karabiner
Traditional locking system
Ideal for dirty or muddy environments
Correct orientation of load can be achieved due to asymmetry in shape
Colour: Silver with brass gate closure
Weight: 195 gm
Size: 110 x 63 mm
Break Load: 50 kN major axis 15 kN minor axis 15 kN open
Gate Opening: 20 mm
Individually tested to 12 kN
Fuji Denko Rope Grab
The Fuji Denko rope grab is a simple, robust, reliable, and low-cost rope grab. Perfect for replacing worn or damaged rope grabs on your roofers kit.
For use with three strand polyester or double braid 11-12 mm rope.
for use with 3 strand poly rope
for use with double braid 12 mm rope
Weight: 550 gm
Size: 120 mm x 65 mm
To remove the captive eye pin:
1) Firmly grasp the center of the pin with vice grip type pliers
2) Gently tap the vice grips near the pin with a hammer, driving the pin out until the knurled end can be pulled with pliers. Be patient, don't hammer too hard or the pin will bend. If your pliers leave marks on the pin, make sure that they are not sharp so it doesn't cause premature failure to any of your soft equipment.